BMB UHF-800 PROFESSIONAL DUAL WIRELESS MICROPHONE + FREE 35 Karaoke DVDs

The new BMB UHF-800 model Wireless Microphone System is the right solution for Karaoke vocalists, Home Entertainment enthusiasts and Club Patrons who have been looking for a cost effective UHF wireless solution that can fit seamlessly into a multitude of applications. Working on crowded group singers UHF frequency bands have develop it on signal, the UHF-800 ensures the best possible performance for all singers.

SPECIFICATIONS;

Receiver Features

1. Power Switch: Turns receiver power on/off.
2. Power on indicator: This red light glows when the receiver is plugged into an electrical outlet and switch is pushed, it indicates that the receiber is on.
3. CHA volume control: Rotate this knob to increase or decrease the volume of CHA of the receiver output.
4. CHA audio level indicator: "AF" Audio level indicator of receiver glows according to the volume of the transmitter when talking or singing in the microphone.
5. CHB audio level indicator: "AF" Audio level indicator of receiver glows according to the volume of the transmitter when talking or singing in the microphone.
6. CHB volume control: Rotate this knobs to increase or decrease the volume of CHB of the receiver output.
7. CHB antenna input terminal.
8. CHA XLR audio ouput: Plug an XLR audio cable from this connector to the input to your mixer.
9. CHB XLR audio output: Plug an XLR audio cable from this connector to the input to your mixer.
10. 1/4" Phone jack audio output: An unbalanced audio cable with a 1/4" phone plug "such as stardard quitar cable" can be used between this connector an your amplifier input.
11. AC power input: Connect the AC adapter to this jack and then plug into an AC electrical outlet.
12. CHA antenna input terminal.
13. CHB squelch control: Adjust squelch control setting to emphasize either signal quality or system range.  This control is factory pre-set, and normally does not need further adjustment. 
14. CHA squelch control: Adjusts squelch control setting to emphasize either signal quality or system range.  This control is factory pre-set, and normally does not need further adjustment.
15. 110V or 220V AC option switch: To select the right power to the system.

Hand-held Features;

1. Grille: Protects the microphone cartridge and helps reduce breath sounds and wind noise.  The grille for the various microphone heads differ in appearance.
2. Power and Audio Mute Switch: Put the switch to ON position, the indicator shines for a moment.  Put the switch to "MUTE", Allows muting of the microphone audio, avoiding the "thump" noise that can occur when turning of the microphone audio.  Its is recessed to prevent it from being accidentally turned off.
3. Low Battery Indicator: A red light glows when there is one hour or less of useful operating time,  allowing battery to be changed before power is depleted.
4. 9V Battery: Provided power to the microphone-transmitter handheld.
5. Frequency Mark: Carrier frequency of transmitter.
6. Battery Cover: Unscrews for access to the battery and gain control.

Receiver Specifications;

• Power Requirements: 120V or 230V AC adaptor with 2.1 mm female plug
• Power Requirements: 12-18V DC nominal, 300mA
• Signal/Noise Ration: More Than 85dB
• Border Upon Channel Rejection: More Than 70dB
• Image & Spurious Rejection: More Than 70dB
• Audio Output Level: 0-+300mV
• Receiver Sensitivity: -105Bm

Hand-held Transmitter Specifications;

• Power Requirements: 9V  battery
• Nominal Current Drain: LESS THAN 40mA
• Modulation Type: FM / UHF
• RF Output: MORE THAN 10dBM
• Max Deviation: -+30KHz
• Spurious Emission: MORE THAN 55dB

Complete Set Include:

1. 2 x Handheld Microphones
2. 2 x 9V Battery Include
3. 1 Receiver Transmitter
4. 1 Manual Booklet
5. 1 Year Warranty: Labor & Parts
6. Made in Japan.

FREE: UPS Ground Shipping Within 48 States